Product Title : DUAL PIC Programmer

Product Category : Stand Alone Programmers

Part No : LPDPG 164130-2

MRP : rupee 14,000.00

Available Stock : 1

(Next Available Stock : 1 on 27/02/2018 )

DualPIC is a cost effective high-speed StandAlone Programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. The Programmer has 2 x independent programmer circuits each with it's own EEprom image. This configuration allows 2 x target devices to be programmed simultaneously even if the targets are not the same. QuadPIC is connected to MPLAB IDE or any other GUI running on a PC using a full speed USB interface to download only once inititally the hex image into each independent programmer's EEprom. DualPIC can be connected to the same type or different type of target boards via RJ-11 to ICSP connector (LPISCP-AC164110).

1. DualPIC Standalone Programmer

2. 5V Power Adapter

3. User manual

4. MPLAB CD containg sample codes

  • Internal Programmers (2) with its own EEPROM for storing Hex image and with its own LED status.
  • Target devices can be programmed independently i.e. without PC.
  • One single ''PROGRAM'' switch to Successively program the devices.
  • Uses the highly successful & proven ''Programmer-to-Go'' concept of PICkit 3 in MPLAB IDE & IPE with MASTER circuit for synchronization.
  • No need to power target from external power source.
  • Under ''Settings'', select ''Power to target supplied by PICkit 3.
  • DualPIC programmers must be powered by USB only.
  • In DualPIC Programmer, 2 same or different hex files can be stored, So 2 same or different targets can be connected respectively.

doxycyclin alcohol doxycyclin xarelto
doxycyclin alcohol doxycyclin xarelto
loratadin apofri loratadin 911 loratadin alkohol
loratadin apofri loratadin 911 loratadin alkohol



Customer Discounts

Min QtyMax QtyDiscount(%)